Signal DJI Mavic Air 2 Skin

iStyles

1/5

Pretty much useless decals. While the looks are there, the adhesive is far from being sufficient to keep them in place. After only couple of days the decals are coming loose even from a flat surface. And no, it's not due to not having clean surface or anything. I can't recommend buying these.

T. Backman, Finland, 28 August 2021

Cybernetik DJI Mavic Air 2 Skin

iStyles responded:

We're sorry to hear about what happened to your Skin. These Skins will stick and generally outlast the lifespan of the device but this depends on the environmental factors that they're subjected to and how well they were applied.

Our Skins come with a balanced adhesive that allows for easy application and goo-free removal. It is important that the Skin stays down and it is just as important that the Skin can be subsequently removed without damage to the device. For example, if the Skin was "super glued" to the device, it will stick well no matter the condition of the surface but it will not be removable.

The Skin adhesive does stick properly, as evident by the other positive reviews, but it is important to clean the device surface properly prior to Skin application. Drones in particular have to be cleaned well prior to Skin application because the surface can be dusty and oily, and this will adversely affect the ability of the Skin to stick properly.

Likewise, environmental factors, such as constant abrasion against the edge of the Skin, which is a similar action to peeling the Skin, and drone crashes, will inevitably result in the edge lifting. In addition, incorrect Skin positioning such that an edge overhangs the device edge will make these edges more vulnerable to peeling or damage. It's also possible the Skin adhesive might have been damaged during the Skin application process if you reapplied the Skin (peeling off and sticking again) too many times when positioning a piece.

We can get another Cybernetik DJI Mavic Air 2 Skin made for you so that you can give this another go, and you just have to cover the ship cost to get the new package to you. If you would like to go for this replacement, please reply to the email that we just sent you and we'll set up the replacement order for you.

iStyles

1/5

Honteux !!
ils ont annulé ma commande sans aucune raison.
J’ai demandé le délai de livraison et n’étant pas en mesure de livrer, ils annulent tout simplement la commande.
Inacceptable.

Ashamed !!
they canceled my order without any reason.
I asked for the delivery time and not being able to deliver, they simply canceled the order.
Unacceptable.

p. , France, 27 December 2023

EXO Wasp DJI Mavic Air 2 Skin

EXO Wasp DJI Mavic Air 2 Battery Skin

iStyles responded:

We're sorry for the misunderstanding. Your order was cancelled and refunded by mistake and for this we apologise. We cannot undo the refund. If you would still like to style your Mavic Air 2, you can place a new order for the Skin set at https://www.istyles.com/skins/drone/dji-mavic-air-2/exo-wasp-dji-mavic-air-2-skin-p-463592.html

You placed your order on 22 Dec (Friday) and wrote to us on 24 Dec (Sunday, Christmas eve) asking whether it was possible to cancel the order as you did not want to wait up to 3 weeks for delivery. We replied within an hour, explained that while deliveries from USA to France can happen quickly in just 1+ week, it usually takes between 1 to 3 weeks, which was why we quoted the turnaround time as such. It can also potentially take longer if there is a delay - delays can happen, especially so at this time of the year because of the holidays and the volume of mail in the postal networks. You replied stating you would like to continue anyway. However, as you started that email with how disappointed you were, we misread it and assumed that you wanted to cancel, so we cancelled your order and processed a full refund by mistake, which was really too bad for us!

We're heartened to see in your email to us today that you are still keen in placing a new order despite your experience and we understand that you're worried about "waiting for the process" again. If you put through an order now, the package will ship in the next 1 to 2 days. This time is required to make the order. After which, the international postal mail turnaround time still applies. We cannot make the postal mail delivery magically happen more quickly, even though we wish we could.

If you are still keen, please put through the new order as soon as you can. It'll be processed asap, and after which, we have our fingers crossed for you with the hope that the package gets to you quickly.

iStyles

1/5

Sticker doesn't lay right on the drone and the instructions are terrible.

H. Fergen, United States, 1 December 2020

Solid State Lime DJI Mavic Air 2 Skin

iStyles responded:

Thank you for the feedback. Drone Skins such as these Mavic Air 2 Skins are a little more difficult to apply indeed because of the comprehensive Skin coverage and the complexity of the drone surfaces to be covered, but when applied properly, the result will be well worth the effort.

It is important to clean the drone surface properly prior to Skin application as any residue solvents or dirt (and drones can get rather messy from use) will affect the ability of the Skin to stick.

The Skin pieces are positioned on the Skin backing card in the same way that they go on the drone and we do hope to improve the instructions and/or layout to make the process more intuitive. If you require assistance with the positioning of any Skin piece, please reach out to us at [email protected] - we'll be happy to help!

The cut of this Solid State Lime DJI Mavic Air 2 Skin set is correct. Drone Skin sets are cut such that the pieces do not meet or touch the edge to ensure the longitivtiy of the Skin set. These tiny gaps are shown on the product images.

Skins that reach the edges do not stay on for long on drones. Such edges will get caught up as the drone is used (for example, when folded or when inserting/removing from a bag) and are more likely to get lifted. This damages the Skin. Imagine a perfectly fitting Skin with corners/edges that are slightly lifted and has a whole bunch of lint and hair sticking to it.

Our drone Skins are cut as such to ensure that the edges stay on well. It is important to apply the Skin pieces such that the Skin is centered on the surface that they go on, with equal distance/gaps between the Skin and the edges all around. If you're aligning the pieces such that they're flush against one edge, it will result in a huge gap on the other end of the Skin piece. The pieces have to be centered with an equal gap all around, equal distance from the edge all around.

I hope these explanations help. Please let us know at [email protected] if you have any further queries or need assistance.