Solid State Black 3DR Solo Battery Skin

5/5

I wanted to let you know that everything is fine. I just wanted to remark how impressed by the process: the product was properly packaged, something that I have had issues with other similar products, and the skins ended up significantly creased.

The installation process was equally facile, with no problems at all, and I’m very happy with the end result.

Thank you for making a great product!

R. Bell, United States, 13 March 2021

Solid State Black Magic Keyboard for iPad Series Skin

4/5

I would have given this product 5 STARS if the skin had an installation clear layer on top of the skin itself to assist with lining up the skin to the device (like what is found with other brands). This would have made the installation easier and more predictable; the top clear layer would adhere to the front of the skin while the bottom of the skin (sticky part) would be exposed until contact is made to the surface of the device. The clear layer would not be peeled away until the skin is lined up properly with the device, including the holes for the front facing camera and lower button. The quality of the skin is good; not as stiff as other brands, but it feels like a one time use, like it's soft enough to peel away but it does stretch a little and might not be reusable (like other brands).

L. Nepomuceno, United States, 8 March 2021

Solid State Black Apple iPad Series Skin

iStyles responded:

Thank you for the review. We're happy to hear that you like the quality of the iPad 3rd/4th Gen Skin.

Thank you for the suggestion. We've looked as such "installation clear layers" before but they do not make Skin installation easier - the user holds the clear layer to adjust the alignment but this has no added benefit compared to holding the Skin directly and aligning. Such installation layers are only useful for screen protectors so as to avoid touching the underside (causes visible fingerprints) but when applying a Skin, it's more precise to hold the Skin directly.

Our Skins come with a special weaved adhesive that allows for easy application and goo-free removal. Just position and stick. If you want to adjust the alignment, simply peel the piece off gently and realign. When you're happy with the alignment, press down hard all around and the adhesive will bond. If applied properly on a clean surface, the Skin usually outlasts the lifespan of the device.

The cast vinyl used for the Skin is thin, can conform better to the shape of the device surface, and less prone to heat and shrinkage over time, unlike the stiffer, thicker and cheaper calendar vinyl used elsewhere, but it can indeed stretch if pulled hard. Some customers claim to be able to reuse their Skins but we advice removing the Skin only when you do not want it anymore.

Please feel free to reach out to us at [email protected] if you have any further queries or need assistance.

5/5

Great experience and goods

Easy to order and find what I was looking for. The order process was straight forward and delivery was timely even though I was on the other side of the Atlantic! Purchase was perfect and just what I wanted, good quality and easy to fit with no issues. All-round good experience fully recommend.

M. Brazier, United Kingdom, 26 February 2021

Solid State Black Apple Magic Trackpad Skin

1/5

I finally got round installing these due to family issue/Xmas etc they were still in original envelope till today.

They do not even come near to hiding the bezel on the Google Home Hub (not Max)

No matter how I place it especially as I need to match up the 3 little holes at top the white/grey bezel is visible on all sides inner and outer edges as the skin is far too narrow to cover it.

I had to remove it and reapply the Google factory temporary cover again as I will not fit the proper screen protectors I bought at the same time till I have a skin that fits and does what it was intended to do and that was to make the bezel appear black.

J. Hume, United Kingdom, 30 January 2021

iStyles responded:

These tiny spacing between the Skin edge and the edge of the surface is correct and as shown on the product image and additional product photos.

These tiny spacing are important to allow for easy application and to ensure the longevity of the Skin. If the Skin was cut without such a give, most people will not be able to apply it correctly and end up with overhanging Skin edges at some parts. In addition, Skin edges that stop precisely at the device edge tend to lift more easily over time and because dust/lint/hair magnets.

The Skin was not designed to completely hide the original color of your device - it is to be applied such that the spacing is the same at all edges. The Skin acts as and looks like a "frame" on this device.

5/5

I was really happy. I was sort of expecting below-average quality of product and service similar to my service with Slickwraps but I was not disappointed. The skin feels smooth and as advertised. The shipping was slower likely due to COVID-19. But it arrived on time and I got emails from iStyles telling me of the shipping process. Overall I’m satisfied. The only thing i wish for is free shipping then I would opening recommend this service to everyone I know.

M. Wang, Canada, 4 December 2020

Solid State Black Smart Keyboard Folio for iPad Series Skin

1/5

Poor Experience, does not fit.

M. Gerleit, Germany, 27 October 2020

iStyles responded:

The Solid State Black Google Home Hub Skin that you purchased is for the Google Home Hub.

Is this the Google Home product that you're trying to put this on or are you using a Google Home Hub Max?

In what way was it not fitting?

We've sent you an email so that we can communicate further to see what went wrong.

1/5

The item was of poor quality and badly cut to shape. It was overlapping in some areas. For the price paid I expected far better

g. williamson, United Kingdom, 4 March 2024

Solid State Black Xbox One X Skin

iStyles responded:

We are sorry to hear that you did not like the Solid State Black Xbox One X Skin set - this has a simple 5 piece flat surface Skin coverage where every piece is basically a rectangular cut and the pieces will not overlap.

As this recent order is your 2nd purchase from us, we assume that your previous order for a Patriotic Xbox 360 S Skin 7 months ago went well?

The Skin application process is similar and the Xbox One X Skin should actually be a little easier to put on because the surfaces are flat. Did you stretch the Skin pieces by accident during the application process? If stretched, the Skin will be longer than it was and this will explain the overlap.

We've just sent you an email - please reply to that email with photos showing what happened so that we can assist you further.

1/5

Says its delivered but I dont have it

R. Carr, United States, 29 June 2020

iStyles responded:

Your order for a Solid State Black Yeti Rambler Jug One Gallon Skin on 21 June was delivered on 27 June "In/At Mailbox" according to USPS.

We've sent you an email to verify your delivery address and assist you further.

Just in case there was some confusion - please note that the product that you purchased is a Skin that styles your existing bottle. The Yeti bottle is not included. The "package" is thus in the form of a flat cardboard envelope that was delivered into your mailbox. This will not be a "box", in case you expected the product to come in one.

Update: As per our email conversation, the Skin that you purchased is not a Yeti Rambler and this explains why you thought the package was not delivered because you were expecting a bottle. We will assist you further with your order via email.

5/5

Great skin, came really fast!

R. Clark, United States, 12 June 2020

4/5

The product is good for the price. It is not the most precise, and the finish of the product isn't what I expected, but I'm satisfied with the product.

P. Patel, United States, 28 April 2020