Customize your Skins

iStyles

1/5

The sticker decal was a bit off on the exact measurements of the button cut outs there's a gap visible from the sticker and the base of the arcade stick I'm using I was hoping it wasn't visible and was cut out to the exact measurements but it's off and doesn't look very good .

R. Sanchez, United States, 2 August 2023

Custom Mayflash Arcade Fightstick F500 Skin

iStyles responded:

The Skin was designed not to touch the edges on purpose as this ensures the longitivtiy of the Skin. Skins that are cut such that they reach the edges are much harder to apply as there is no margin for error and they may not stay on properly for long - such Skin edges will overhang if not applied with absolute robotic precision, will get caught up with use over time and are more likely to get lifted. This damages the Skin.

There is supposed to be a very tiny gap between each Skin edge and the edge of the surface as shown on the product photos. If you've aligned your Skin set flush against the top edge, the gap will be larger at the bottom. The Skin has to be centered between the two. When applying the Mayflash Arcade Fightstick F500 Skin set, it has to be centered firstly based on the position of the buttons and stick, then positioned such that the gap from the faceplate edges (top, bottom, left, right) is equal all around.

If applied properly, the Mayflash Arcade Fightstick F500 Skin set looks brilliant.

If you've misaligned your Skin set, gently peel it off and reposition it such that everything's centered.

iStyles

1/5

Horrible, im so disappointed. The measurements off and it doesn’t cover it properly! I spend over 50$ Canadian to get this crab!!!

S. Gordon, Canada, 18 May 2022

Custom Microsoft Surface Laptop Series Skin

iStyles responded:

We're sorry to hear that the Skin set did not fit. The custom Skin that you ordered is for the Microsoft Surface Laptop Go (released in October 2020) and will only fit this model. Is yours a Surface Laptop Go 2 or any other Microsoft Surface model?

You can check your Surface model by following the instructions at https://support.microsoft.com/en-us/surface/find-out-which-surface-model-you-have-da204261-8d26-9351-8588-5b09632c9486

Please reply to the email that we've just sent to you so that we can help you sort this out!

iStyles

1/5

Incorrect Item

I received the incorrect skin. I ordered a skin for an Ottherbox Galaxy Note 10 Plus. The one I received did not fit that particular Otterbox.

A. DiLeonardo, United States, 6 August 2020

iStyles responded:

You ordered a custom "Samsung Galaxy Note 10 Plus Skin" and this goes onto your Galaxy Note 10 Plus directly. This is not for an OtterBox case.

We have Skins and Cases for the Galaxy Note 10 Plus and Skins for other OtterBox cases, but Skins are not available for the OtterBox Galaxy Note 10 Plus case (yet).

It is unfortunately not possible to return the custom product you made as this was made specially for you using your design - this Skin will go on the back of your phone directly and should fit even when your phone is in the case (it'll be visible when you take the phone out of the case).

iStyles

1/5

Sent the wrong product. I ordered a skin with a picture on it, and received two solid colored skins.

b. steers, United States, 4 September 2018

iStyles responded:

The custom Skins that you made were solid red. There were no pictures on them, which probably means that you did not saved these pictures or add them properly if you intended to add pictures. For example, if you added pictures first and added a solid red background after, the background will be "on top" of the pictures and these pictures will not be visible.

The preview image of your custom Skin shows a single tone sold red artwork.

Did you receive a solid red tone Skin or was the Skin that you received of another color?

Can you send us digital photos at [email protected] showing the Skin that you received?

iStyles

1/5

Nothing like getting a completely blank cover!! Absolute GARBAGE!!! And to boot there isn't even a contact number to complain. Do NOT use this sight!!

R. Justice, United States, 8 December 2016

Custom Nintendo 3DS XL (Original) Skin

iStyles responded:

We're sorry to hear that your custom Skin was wrong. We're investigating why this happened. We will have the corrected Skin made and reshipped to you asap. You should get the replacement within the next week.

iStyles

1/5

I was very disappointed when the package arrived. I had spent 2 weeks talking with a customer service rep. Thinking I was ordering controllers. They arrive and it is decals. This was for my husband and I feel aweful now.....

L. Guccione, United States, 19 July 2014

Custom PlayStation 3 Controller Skin

iStyles responded:

We're sorry to hear that the Skins were not what you expected. The "Custom PlayStation 3 Controller Skins" that you ordered were Skins for the PS3 Controller.

When we communicated 2 weeks back, we were under the impression that you understood that these were Skins and assisted you with your customization (remember, we created the graphics for you at no charge). If we knew that you thought these were controllers, we would have clarified the information.

These Skins will fit the existing PS3 controllers that your husband has. He should have at least one controller - if necessary, just purchase the 2nd controller and your "His" and "Hers" controller Skin designs will fit both perfectly.

iStyles

1/5

Very very very bad !!! Not reseved my stickers and refused to returen my money ! Take care and dont spend you money go to gelaskins it is better

r. suwais, Saudi Arabia, 29 November 2013

iStyles responded:

The zip code in your address was incomplete and this is probably the reason why your package has not arrived yet.

As per our correspondence, we offered to reship your package, which you did not accept, and we can only process a refund for the products returned when this package delivery fails and gets "returned to sender".