Flames

5/5

I was very impressed with the speed and the updates provided by the seller. So much so that I ordered a second skin set for my other drone. The fit of the skins is exceptional and only took me about an hour to apply and I have not done one before. I will not hesitate to order from them again! Thanks!

M. Daniels, United States, 31 May 2023

Solid State Orange DJI Air 2S Skin

Combustion DJI Mavic Mini Skin

5/5

The support is excellent. Thank you, the skins are "wicked cool"!

E. Jacques, United States, 6 May 2023

Mamba DJI FPV Combo Skin

Combustion DJI Avata Skin

Chunky DJI Mavic 3 Skin

Sacred Honu DJI Mini 3 Series Skin

Sacred Honu DJI RC-N1 Controller Skin

Sacred Honu DJI Mini 2 Skin

Combustion DJI FPV Remote Controller 2 Skin

Mamba DJI Motion Controller Skin

5/5

I love the IStyles drone skins. I had a problem with my initial order and the support team took care of it immediately. I switch skins once in a while which gives the drone an entirely different look.

D. Nolda, United States, 20 December 2022

Fire Dragon DJI Mini SE Skin

5/5

Very nice decal kit great fit and quality

K. Hand, United States, 13 November 2022

Hot Rod DJI Mini 2 Skin

5/5

It looks great - thanks!

E. Roderick , United States, 6 August 2022

Combustion DJI Mini 3 Series Skin

3/5

The material it is made of is good.
But, the areas that are exposed are too many. The stickers are cut with too much margin and that makes them not fit very well. If you look from a distance everything seems correct, but if you look closely you see small bad details such as the corners lifting and peeling off, the areas where the sticker has to adapt to a curve do not fit and peel off. Also comment that there are several areas of the drone that are left without a sticker and it is ugly (the back legs, the loading area and sd card, the parts of the legs below.
In short, it could be a great product, but since it is not well adjusted, it is average to mediocre.

D. velasco, Spain, 19 May 2022

Hot Rod DJI Mini 2 Skin

iStyles responded:

Thank you for the feedback. We're happy that you like the Skin material but sorry to hear that your Skin started to peel.

These Skins will stick and generally outlast the lifespan of the device but this depends on the environmental factors that they're subjected to and how they were applied. Almost all (50 out of 52) of our Mini 2 Skin reviews were rated 5 stars; these customers would not have been happy if their Skin was peeling.

Our Skins come with a balanced adhesive that allows for easy application and goo-free removal. It is important that the Skin stays down and it is just as important that the Skin can be subsequently removed without damage to the drone. For example, if the Skin was "super glued" to the drone, it will stick well no matter the condition of the surface but it will not be removable.

The Skin adhesive does stick properly based on feedback from our other customers, but it is important to clean the device surface properly prior to Skin application. Drones in particular have to be cleaned well prior to Skin application because the surface can be dusty and oily, and this will adversely affect the ability of the Skin to stick properly.

Likewise, environmental factors, such as constant abrasion against the edge of the Skin, which is a similar action to peeling the Skin, and drone crashes, will inevitably result in the edge lifting. In addition, incorrect Skin positioning such that an edge overhangs the device edge will make these edges more vulnerable to peeling or damage. It's also possible the Skin adhesive might have been damaged during the Skin application process if you reapplied the Skin (peeling off and sticking again) too many times when positioning a piece.

The Skin was designed not to touch the surface edge on purpose as this ensures the longitivtiy of the Skin. Skins that are cut such that they reach the edges are much harder to apply as there is no margin for error and they may not stay on properly for long - such Skin edges will overhang if not applied with absolute robotic precision, will get caught up with use over time and are more likely to get lifted. This damages the Skin and will result in "corners lifting and peeling off".

There is supposed to be a very tiny gap between each Skin piece and the edge of the surface as shown on the product photo; the Skin is to be applied such that the "gap" is equal all around the Skin piece (Skin centered on the surface). If you pasted a Skin piece such that it is flush against one edge, this will result in more vulnerability at this Skin edge and a larger gap at the opposing edge.

Skin application on a drone can be complicated because of the extensive coverage and complex surfaces, especially so on curved surfaces. The Skin material is flexible and can adapt to curves, but it is very important that the surface is cleaned properly prior to application and the piece on the curved surface has to be pressed down hard.

We can get a complimentary Hot Rod DJI Mini 2 Skin made for you so that you can give this another go, and you just have to cover the ship cost to get the new package to you. If you would like to go for this replacement, please reply to the email that we sent to you and we'll set this up!

5/5

The only thing I have to say is a BIG thank you. You are doing a great work with great service. Never got a thank you mail before after receiving the products.
Continue the great work!

E. Steinick, Sweden, 26 February 2022

Flower Of Fire Apple TV HD, 4K 1st Gen Skin

Samurai Honor Nintendo Switch Pro Controller Skin

Before The Storm Meta Quest 2 Skin

Kingsnake PlayStation 5 Skin

5/5

Fast shipping, everything perfect as described.

T. Ramlow, United States, 5 April 2021

Combustion DJI Mavic Air 2 Skin

5/5

Product looks great. Delivery was very quick. Would definitely buy from you again. Thanks.

J. Beausoleil, Canada, 20 February 2021

Combustion DJI Mavic Air 2 Skin

5/5

verry good stuf

C. V KEEREN, Netherlands, 30 September 2020

Combustion DJI Mavic Pro Skin