
Skins are premium grade decals that feature stunning, vibrant graphics printed on high quality cast vinyl.
Each Skin covers your devices, provides low profile protection with no bulk and helps protect from scratches. The unique weaved adhesive allows for fast, easy and accurate application, and goo-free removal.
Wrap your devices and make it uniquely yours.
/5The product arrived damaged. Waste of money!M. Irwin, United States, 14 September 2018iStyles responded:
We're sorry to hear about what the postal service did to your package.
Can you send photos showing the damaged package and Skin to [email protected]? We will get a replacement AirPods Skin set sent out upon the verification of these photos.
/5It’s very bad. Very very badJ. Beukema, Netherlands, 28 February 2018
Didnt fit. Product is already peeling and I had to Rip it to fit. Would like to have a refund Because this product is very bad. I wouldn’t recommend it. I took it off just beacuse it was that bad.iStyles responded:
We're sorry to hear about what happened to your Skin. Thank you for the photos that were sent via email.
These photos however show that you've stretched the Skin during the Skin application process. The Skins have to be applied carefully and are more vulnerable at thin areas, especially the tiny stripes that go around the screen frame of your Nintendo 2DS XL.
These Skins will stick and generally outlast the lifespan of the device but this depends on the environmental factors that they're subjected to and how well they were applied.
Our Skins come with a special weaved adhesive that allows for easy application and damage free removal - the adhesive strength is a balance between something that sticks well, and something that is also removable when you do decide to take the Skin off. A stronger adhesive like those used on conformed vinyl (eg, car wraps) will stick more strongly but such adhesive can damage the surface of the device as they are too aggressive.
These non-conformed vinyl Skins will stick well but it is extremely important that the device is cleaned properly prior to application as any residue can affect the adhesive strength. Cleaning the device well prior to Skin application is especially important on a gaming device where there's usually a fair bit of residue from perspiration.
Likewise, environmental factors, such as constant abrasion against the edge of the Skin, will inevitably result in the edge lifting. In addition, incorrect Skin positioning such that an edge overhangs the device edge will make these edges more vulnerable to peeling or damage.
Given what happened to your Skin and your dissatisfaction with it, we've processed a full refund for your order. I hope that this satisfies your concern.
/5Terrible, expensive. Just skin in front laptop, not for all. Don’t buy itH. Do, United States, 18 February 2018iStyles responded:
We're sorry to hear that you did not like the Skin coverage. You custom sized a universal fit laptop Skin and this Skin set only comes with the lid Skin.
If you have a laptop that we support specifically, the Skin set may come with additional coverage for the wrist rest or even bottom of the laptop, but custom sized universal fit laptop Skins can only be custom sized for the laptop lid.
/5La peor experiencia compré hace muchos meses código 179860, y nunca llego, me siento estafado, perdí tiempo y dinero.H. Flores Albornoz, Chile, 14 January 2018iStyles responded:
Lamentamos que su paquete aún no haya llegado. Su paquete fue enviado desde las instalaciones de los EE. UU. El 6 de noviembre con el ID de entrega USPS UA648282179US como id. Del paquete y el tiempo de entrega es generalmente de una a tres semanas dependiendo de cómo se enruta el correo y qué tan rápido lo maneja el servicio postal de destino. El paquete será entregado por el servicio postal en el destino.
Según https://tools.usps.com/go/TrackConfirmAction?tLabels=UA648282179US, el paquete se enruta correctamente dentro de los EE. UU. Y salió de los EE. UU. El 7 de noviembre. El paquete está siendo procesado por el servicio postal de Chile.
Su paquete será bastante grande, ya que contiene un DJI Mavic Pro Skin y es probable que su cartero local no pueda colocarlo en su buzón de correo. Debería haber dejado una nota para la recolección de este paquete en la oficina de correos cercana, pero esta nota a veces está fuera de lugar. Es probable que su paquete esté esperando la recolección en la oficina de correos y solo tiene que ir y recogerlo.
Podemos reenviar su paquete pero necesitamos que verifique lo siguiente respondiendo a nuestro correo electrónico:
1) ¿Revisó en la oficina de correos el paquete grande como se indicó en mi último correo electrónico?
2) ¿Es correcta la dirección de entrega utilizada (que escribimos en el correo electrónico)?
/5Purchased skin's for wireless beats and when taking the skins off the paper to place on the beats headphones? they tore and stretched beyond using. Not happy with this product in the least.T. Hausmann, United States, 18 March 2017iStyles responded:
We're sorry to hear that your Baseball Beats Solo 2 Wireless Skin was stretched during the Skin removal.
Our Skins are made of premium grade adhesive-backed cast vinyl, then sealed with a matte or gloss laminate for long-lasting protection. Cast vinyl is of notably higher quality and cost roughly 2.5 times as much as the usual calendared vinyl used elsewhere. Unlike calendared vinyl, cast vinyl does not discolour, is much less prone to shrinkage over time, much thinner, and can conform easily to just about any curve.
Cast vinyl is sturdy and will generally outlast the lifespan of the device but the material can stretch if pulled hard and this was probably what happened when you removed the Skin. We're not sure how you tore the Skin as that will require a fair amount of force - Skins have to be peeled off gently and then pasted on carefully. These are not exactly the rip off and slap on type. Care must be taken during the application process and the result will be well worth the effort.
We can make a replacement Baseball Beats Solo 2 Wireless Skin for you at no charge so that you can give it another go, and you just have to cover the shipping cost to get the new package to you. We've sent you an email regarding this replacement Skin.
/5I messed this upH. Voechting, United States, 17 April 2016
I thought it was the actual guitar so i was surprised when it was only the decaliStyles responded:
Sorry to hear that. The Play Dead Guitar Hero II XBox 360 X-plorer Controller Skin that you purchased is a Skin for the Guitar Hero II XBox 360 X-plorer Controller.
You can buy Guitar Heros here.
You can return the Skin for a refund if you have not used it yet. I've raised a return request for you and we'll send you an email with return instructions in the next business day.
/5COMPLETE SHIT. No way to get the front skin on the tablet without screwing it up. I am a patient person and have installed MANY screen protectors as I am in Tech business. This is just impossible to get on the device.C. James, United States, 24 November 2014
They should know better than to sell a skin like this that is impossible to get on the outline of a tablet without stretching and tearing.
DO NOT WASTE your money.iStyles responded:
We're sorry to hear that you stretched the Skin. The Skins are sturdy and will last for years if applied properly but they can stretch if pulled hard and they're especially vulnerable at the thinner stripes such as those around the screen frame.
One way to prevent stretching is simply not to press the Skin down until you are happy with the alignment (this way, it's easier to peel off), and when peeling off, take extra care and do so slowly.
We can send you a replacement and you just have to cover the shipping cost to get the new Skin to you. If you would like to proceed with the shipment of this free replacement Skin, reply to the email that we just sent to you and we'll get it set up.
/5What a amazed these faked reacts posted on this bad website. It' been 3 weeks now from us to canada, which I never experienced delay from any sellers and I am still waiting. I recommend you using gelaskin, vinylskin or tens of them out there. I fought for slow and low quality service against this seller more than 1 month now got exhausted. Please don't waste your time and money.P. Kim, Canada, 10 November 2013iStyles responded:
We're sorry that your experience did not meet your expectation. We understand that you were upset that your order has not arrived yet in your email on 7 November but it was just 1+ week at that time. While many international deliveries happen within 1+ week, especially so for USA to Canada shipments, it can take longer depending on how the postal services handle the mail.
Your order was received on Friday 25 October and shipped on Monday 28 October. The postal mail shipping method that you selected has a stated '6 to 11 business days estimated' shipping time and this very much depends on how USPS and Canada Post handles the mail.
We will be at the 2 week mark tomorrow (11 November) - not 3 weeks or 1 month - and though the postal service is not early, they are not exceedingly late either such that we should be worried because it is still within the estimated shipping time.
As long as your delivery address is correct, precisely, it should be all right and the package is on its way. Try checking with the post office that services your area too (quote package id LN823204587US) - your package will be relatively large because it contains a Galaxy Note 8 Skin and it is possible that your postman attempted a delivery, could not fit the package into your mailbox and 'forgot' (it happens) to leave the collection slip. Your package may be awaiting your collection, but if it is not, please give them more time. It is on its way!
/5Bought a carbon fiber skin for my macbook pro 13 retina without cutout for the top logo. Ordered outer and inner skins. Expected there would be a bottom, but since it's not pictured I should have known better. Fit on the top is not good. I was able to center it on the top fine, but there is absolutely no way to get it on the top without leaving a very small border around all four edges. It's simply just a mm or two too small in all directions. Also even though the skin covers the logo, the skin is not fully opaque and the logo glows through it. It looks very bad. I ripped it off and trashed it. $42.00 in the trash. not pleased. I won't make the mistake of ordering from here again.B. Lewis, United States, 29 September 2013iStyles responded:
Thank you for the feedback. We're sorry to hear that you had a bad experience with the Skin. We'll try to address your concerns as follows:
1) The "Outer" MacBook Skin does not cover the bottom because it is important to allow the device to "breath" during normal operation. This bottom area gets hot and the unibody acts as a heat sink - if it is covered, the heat will not be able to dissipate properly. The description states coverage for the top for the outer Skin and the area around the keyboard and trackpad for the inner Skin. We recommend using a Skin for styling and protection of the scratchable unibody during normal operation and when transporting the MacBook, put it in a padded sleeve or bag.
2) The Skin is opaque but the MacBook logo glow will be visible softly in very dim light conditions. Most customers like this effect and this is only visible in dim lighting. (the logo can be cut out for full visibility)
3) The top Skin will fit. If it's just an mm off on yours (out of the huge surface area on the lid Skin), it means that the Skin can be better stretched into place during the application process.
/5customer support wont respond for cancellation.K. Creed, United States, 31 May 2013iStyles responded:
Your cancellation was processed and we replied to your email within 4+ hours. We wish we can reply via email within minutes like we sometimes do but it usually takes a few hours (but isn't this really fast? Some companies take more than a day, or days!).
