Refine your choices
Customize your Skins
Create your personalized Skin, Case or Sleeve. Upload photos and customize with text. iStyles it yours.
Similar categories
Reviews
iStyles/5The new graphic for my DJI Air2s arrived safely in the mail yesterday & I fitted it up to the drone last night.C. Sherwood, Australia, 3 November 2023
I love how the design I did has brightened up the look of the drone & I'm surprised how well it turned out to be honest. It seems to be very good quality vinyl & with the bright colours, it is certainly a lot easier to see during flight.
As the instructions say, take your time & allow a couple of hours or more. I would suggest starting at the top of the aircraft and fitting the larger pieces first - take your time.
Also anticipate having to find a happy median to match up the smaller pieces as some of the decals are not an absolute exact fit - plan ahead with your layout & did I mention to take your time?
All in all, a great product
iStyles/5The sticker decal was a bit off on the exact measurements of the button cut outs there's a gap visible from the sticker and the base of the arcade stick I'm using I was hoping it wasn't visible and was cut out to the exact measurements but it's off and doesn't look very good .R. Sanchez, United States, 2 August 2023iStyles responded:
The Skin was designed not to touch the edges on purpose as this ensures the longitivtiy of the Skin. Skins that are cut such that they reach the edges are much harder to apply as there is no margin for error and they may not stay on properly for long - such Skin edges will overhang if not applied with absolute robotic precision, will get caught up with use over time and are more likely to get lifted. This damages the Skin.
There is supposed to be a very tiny gap between each Skin edge and the edge of the surface as shown on the product photos. If you've aligned your Skin set flush against the top edge, the gap will be larger at the bottom. The Skin has to be centered between the two. When applying the Mayflash Arcade Fightstick F500 Skin set, it has to be centered firstly based on the position of the buttons and stick, then positioned such that the gap from the faceplate edges (top, bottom, left, right) is equal all around.
If applied properly, the Mayflash Arcade Fightstick F500 Skin set looks brilliant.
If you've misaligned your Skin set, gently peel it off and reposition it such that everything's centered.
iStyles/5“Skin” does not really adhere to the cover at all. Good price, quick turnaround but quality of the product is not what I expected. Wish I could give it 5 stars but the adhesion to the iPad case just not what it needs to beM. Hermes, United States, 24 June 2023iStyles responded:
We're sorry to hear that the custom iPad Pro 12.9-inch Magic Keyboard Skin was not sticking well to your Magic Keyboard. These Skins will stick and generally outlast the lifespan of the device but it is a little more complicated because of the Magic Keyboard's surface.
Our Skins come with a balanced adhesive that allows for easy application and goo-free removal. It is important that the Skin stays down and it is just as important that the Skin can be subsequently removed without damage to the device. For example, if the Skin was "super glued" to the device, it will stick well no matter the condition of the surface but it will not be removable.
The Skin adhesive does stick properly based on feedback from our other customers, but it is important to clean the device surface properly prior to Skin application. Magic Keyboards in particular have to be cleaned very well prior to Skin application because as it is, the rubbery like material on the cover's surface makes it difficult for anything adhesive to stay on, and this same material also appears to be a magnet for human oil (tends to become more slippery with use); if it's not perfectly clean, the Skin will not be able to stick to to such a surface.
Likewise, environmental factors, such as constant abrasion against the edge of the Skin, which is a similar action to peeling the Skin, will inevitably result in the edge lifting. In addition, incorrect Skin positioning such that an edge overhangs the device edge will make these edges more vulnerable to peeling or damage. It's also possible the Skin adhesive might have been damaged during the Skin application process if you reapplied the Skin (peeling off and sticking again) too many times when positioning a piece.
We can get another custom iPad Pro 12.9-inch Magic Keyboard Skin made for you so that you can give this another go, and you just have to cover the ship cost to get the new package to you. If you would like to go for this replacement, please contact us and we will set this up for you.
iStyles/5Great service, quality and delivery time!E. Champion, United Kingdom, 1 June 2023
iStyles/5It was a pleasure to buy products that are awesome. S22 ultra skins works SOOO well without issues.S. Gaming, United States, 23 October 2022
iStyles/5Great skins, easy to apply, look fantastic!L. Stouder-Studenmund, United States, 5 June 2022
iStyles/5Horrible, im so disappointed. The measurements off and it doesn’t cover it properly! I spend over 50$ Canadian to get this crab!!!S. Gordon, Canada, 18 May 2022iStyles responded:
We're sorry to hear that the Skin set did not fit. The custom Skin that you ordered is for the Microsoft Surface Laptop Go (released in October 2020) and will only fit this model. Is yours a Surface Laptop Go 2 or any other Microsoft Surface model?
You can check your Surface model by following the instructions at https://support.microsoft.com/en-us/surface/find-out-which-surface-model-you-have-da204261-8d26-9351-8588-5b09632c9486
Please reply to the email that we've just sent to you so that we can help you sort this out!
iStyles/5Skins look greatG. Lesniowski, Poland, 8 May 2022
iStyles/5Fast delivery and good quality decal, eaasy company to work with!A. Ritson, United Kingdom, 6 May 2022
iStyles/5WOW! I ordered 2 skins and they look absolutely terrific. The quality is great and the images I uploaded, were printed without any loss of quality. The only changes I would want are:J. Cerezo, United States, 25 February 2022
1) I would like the option to remove the button labels. By no means do they take away from the aesthetic but I would have loved to have the image completely without any text.
2) I would like a non-adhesive option to have the skin printed on. This is only because I bought more than one and would like to swap them at my leisure. Since the graphic insert itself sits on a recessed surface underneath an acrylic panel, there is no need to for adhesion as it won't really move. I was able to work around this by not removing it from the backing altogether. Instead, I simply cut the entire decal out with a hobby knife.
Again, these issues are so minor but just food for thought. I am VERY happy with my purchase!
CHEERS!
Customize
