Drone Skins

2/5

Very disappointed with this Kit for the Avata 2 No Instructions for the Batteries or Goggles pretty much had to wing it through the process, I found myself getting frustrated and half way through the process, I end up taking the vinyl skin off .. I don't recommend this item for the Avata 2!

F. HENDRICK, United States, 6 May 2024

Solid State White DJI Avata 2 Skin

iStyles responded:

We are sorry to hear that you did not complete the Skin application process. Drone Skins are fairly involved installs because of the comprehensive coverage and the complexity of the surfaces covered, and do require patience to put on; the end result is well worth the effort.

Coverage for each battery is a single Skin piece that goes onto the face of the battery. The other Skin pieces on that Skin sheet are supposed to go on the drone (eg, the pod edges) as per the install guide.

Installation guides are provided for the Avata 2 Skin sets, but the other kits such as the Goggles should be pretty straightforward to get on.

As per our correspondence, we will be shipping you a replacement Solid State White DJI Avata 2 Skin so that you can give this another go. We hope that the new set works better for you!

2/5

I thought the skins for the dji fpv combo were in gloss finish as what I’ve seen on a youtube video. The drone skins on the video were glossy which made me decide to buy one. Got so excited once placed the order. Once the skins arrived, my excitement turned into dismay only to find out that the skins were just like sticker papers and far from clean, glossy and expensive looking drone wraps. Now I’m very skeptical on installing them on my drone because I might not like how it would turn out once installed whether it would look like a flying paper drone or an upgraded awesome looking one. If only my order comes with a free return I would definitely return it.

E. Gaddi, United States, 12 August 2026

Bleep Bloop DJI FPV Combo Skin

Bleep Bloop DJI FPV Intelligent Flight Battery Skin

Bleep Bloop DJI Motion Controller Skin

iStyles responded:

Thank you for the feedback. We used to have matte and gloss finish options many years back but this was subsequently streamlined to the default matte finish that most people preferred.

While gloss had some fans, people generally went for matte because it felt more premium and makes the design looks better. Gloss, comparatively, is reflective, and makes the design less visible when viewed outdoors. Gloss finishes on a drone is a bad idea as it makes the drone less visible in flight by reflecting the surrounding environment.

Furthermore, the design you selected looks like a spaceship and is more accurate in matte, just like how the space shuttle and fictional space fighter jets look.

As for the thickness; in the world of vinyl, thicker vinyl is cheaper. Our Skins are printed in high-resolution and full colour on premium grade adhesive-backed cast vinyl, then sealed with a protective laminate for long-lasting protection.

Cast vinyl is of notably higher quality and cost much more than the usual “thick” calendared vinyl used elsewhere. Unlike calendared vinyl, cast vinyl does not discolour, is much less prone to shrinkage over time, much thinner, can conform better to surface curves, and will last 7-9 years. Thicker vinyl will not go on well on the curved surfaces of the drone.

Give the Skins a go, we think you’ll like them!

2/5

I was sent the wrong skin, was told to contact someone else for a return, i did that, never heard back, said heck with it, would not use again.

T. Orndorf, United States, 24 January 2017

Solid State Vibrant Pink DJI Phantom 3 Skin

iStyles responded:

We're sorry to hear that the Skin was not what you wanted. The product that you purchased was a vibrant pink Skin for the DJI Phantom 3.

Why was the Skin wrong? Were you looking for a Skin for another DJI drone?

We never received your contact email. Who did you contact?

We have sent you an email regarding this issue as we would like to fix it for you.