Carbon Fiber Xbox 360 E Skin

3/5

Styling was great. Back piece fit perfectly. Front piece did not fit - tried 6 ways from Sunday, but no success. I have never had this problem applying skins on other devices.

D. Nagel, United States, 13 January 2015

iStyles responded:

We're glad to hear that you liked the styling and that the back fitted perfectly but we're sorry to hear that you had problems with the fit of the front Skin.

The Skin that you purchased was designed for the Samsung Galaxy Tab S 10.5-inch SM-T800NT. Is this the model of your tablet or are you using any other variant?

In what way did the front Skin not fit? Was it too large or was the cutting completely different? If the Skin was too large, it is possible that you might have accidentally stretched the Skin during the application process. Can you try pasting this front Skin back onto the backing card? If the Skin is bigger than the hole that it was peeled off from, it verifies that the Skin was stretched. If the Skin was stretched, we can make another one for you to give it another go at no charge and you just have to cover the shipping cost to get the new piece to you. Please let us know if you would like to get this replacement order set up.

5/5

This product was pretty good makes my phone stand out from all the other white phones out there, sticks well to the phone and was pretty easy to apply. My only criticism is that the back sticker could be a little bigger to cover the back rim (although i suppose applying this would be difficult as it would result in creases) so an alternative would be to provide a cut out trim for the back edge - just an idea not sure how well would work. Nevertheless, I like the product was decent price and arrived in good time.

A. chowdhary, United Kingdom, 8 July 2014

iStyles responded:

Thank you for the review. We're glad that you like the Skin.

Extending the back Skin more to cover the "black rim" will indeed result in creases. The Skin was cut to cover as much of the surface as possible but will not go onto the sloping sides as excess Skin material will bulk up and result in creases. We're glad that you like the Skin nevertheless!

5/5

I have purchased many skins from istyles and have always been satisfied. I like to change my skins often, so the fact that I can buy them affordably is a plus. I have never had an issue with quality either. Easy to install, good quality and a great price...what more can you ask for. give them a try.

j. simon, United States, 27 December 2013

5/5

Didn't imagine they would have had what I was looking for. They made me into a believer.

R. MONTOYA, United States, 24 October 2013

1/5

Bought a carbon fiber skin for my macbook pro 13 retina without cutout for the top logo. Ordered outer and inner skins. Expected there would be a bottom, but since it's not pictured I should have known better. Fit on the top is not good. I was able to center it on the top fine, but there is absolutely no way to get it on the top without leaving a very small border around all four edges. It's simply just a mm or two too small in all directions. Also even though the skin covers the logo, the skin is not fully opaque and the logo glows through it. It looks very bad. I ripped it off and trashed it. $42.00 in the trash. not pleased. I won't make the mistake of ordering from here again.

B. Lewis, United States, 29 September 2013

Carbon Apple MacBook Skin

iStyles responded:

Thank you for the feedback. We're sorry to hear that you had a bad experience with the Skin. We'll try to address your concerns as follows:

1) The "Outer" MacBook Skin does not cover the bottom because it is important to allow the device to "breath" during normal operation. This bottom area gets hot and the unibody acts as a heat sink - if it is covered, the heat will not be able to dissipate properly. The description states coverage for the top for the outer Skin and the area around the keyboard and trackpad for the inner Skin. We recommend using a Skin for styling and protection of the scratchable unibody during normal operation and when transporting the MacBook, put it in a padded sleeve or bag.

2) The Skin is opaque but the MacBook logo glow will be visible softly in very dim light conditions. Most customers like this effect and this is only visible in dim lighting. (the logo can be cut out for full visibility)

3) The top Skin will fit. If it's just an mm off on yours (out of the huge surface area on the lid Skin), it means that the Skin can be better stretched into place during the application process.

5/5

I've purchased more expensive products and not received the level of service and follow through that I received with this one order. I work in marketing so I always have my eyes open. Consistently, I am underwhelmed time and again by companies. However, with this one little sale your company outshines many other businesses that speak to service but don't deliver. You do. Thank you. I am sincerely impressed. Cheers.

D. Houck, United States, 29 April 2013

Carbon Fiber Laptop Skin

5/5

Excellent product and great after sales attitude and service.

c. cohen, France, 4 March 2013

5/5

I ordered my "skin" and received it in less than a week. I have already placed it on my Sony Bloggie, and this quality product looks great.

R. Pohl, United States, 9 September 2012

5/5

Carries a variety of choices. Great service and speedy shipping. Shipped in a well packed envelope. Redeem code makes you want yo return for more. Bought from this merchant several times already.

S. Limcharoen, Thailand, 14 August 2012

Carbon Fiber PS3 Controller Skin