Designs

4/5

holes didnt match up, dimensions are off

M. Gotoc, Canada, 12 June 2022

Composition Notebook Microsoft Surface Pro Series Skin

Pencil Microsoft Surface Pen Skin

iStyles responded:

We're sorry to hear that the Composition Notebook Microsoft Surface Pro 5, Pro 4 Skin set did not fit. Please reply to the email that we just sent to you with photos to show what went wrong so that we can help!

This set will only fit the Microsoft Surface Pro (5th Gen, released in 2017) and Surface Pro 4 (released in 2015). If you're using one of these models, the Skin set will fit perfectly.

Is yours a Surface Pro 4, Pro 5, or are you using a different Microsoft Surface device, such as the Surface Pro 6 or Pro 7?

4/5

My delivery came today and I was pleased with result.

L. Matthews, United Kingdom, 13 April 2022

4/5

Pretty and great quality! Just came in today and can’t wait to put it on my device to personalize it!

k. mullin, United States, 12 March 2022

Terrazzo Amazon Kindle Series Skin

4/5

Ordered Exo Pioneer for PS3 & controller (black & green hexagon), ps2 in black & ps4 controller skin in purple.

PS4 controller in purple really pops, looks fantastic. Put PS2 skin in black on a silver ps2 giving it a Raiders silver & black feel. Takes some patience putting the skin around front vents.

The Skins for the PS3 (console & controller) are not pictured. They were the Exo Pioneer. Looks better on the controller (smaller setting) than on the Console (large canvas). The green color is off. does not have that metallic green shine as pictured but rather a white green. This one just did not translate to post production.

D. Keating, United States, 12 March 2022

Solid State Black PS2 Skin

EXO Pioneer PS3 Skin

EXO Pioneer PS3 Controller Skin

4/5

I'm happy with the design but the seams and overlaps aren't holding down as I hoped they would. I am a vinyl tech at a sign company and cleaned everything properly but there are edges that aren't holding down. I will see how it holds up!

M. Gibson , United States, 9 March 2022

Jet Blast DJI Air 2S Skin

Jet Blast DJI Air 2S Battery Skin

iStyles responded:

Thank you for the review. We're glad to hear that you like the design but sorry to hear that some edges are coming off.

There is not supposed to be any "overlap". The Skin pieces are such that they only stick on the device surface and are not meant to overlap. Overlapping edges will come off.

If you have overlapping edges, try gently peeling off the affected pieces and reapplying them such that the edges do not overlap. Not only are they not supposed to overlap, the pieces are supposed to be centered on the surfaces that they go onto, leaving an equal gap all around from the edge. If a Skin piece is positioned such that its edge is flush against the edge of the surface, this Skin edge will be more prone to lifting from wear and tear as it get caught up more easily.

We use a premium cast vinyl material that comes with a special weaved adhesive that allows for easy application and damage free removal. Unlike the thicker traditional vinyl used for other purposes such as car wraps, our vinyl is thinner and has less aggressive adhesive.

Thinner vinyls are more costly but they're less prone to shrinkage and can conform better to non-flat surfaces. They're also lighter, which is great for drones. The balanced adhesive allows for the vinyl to be subsequently removed with no damage to the device surface; it is just as important that the vinyl can be removed as it is that they say down. If a more aggressive adhesive like those in traditional vinyl was used, the vinyl will stick more strongly but may damage the device surface when peeled off.

If applied properly, these Skins usually outlast the lifespan of the device. Try repositioning the pieces with edges that are coming off such that the Skin edges do not overlap and are not flush against the surface edge. They should stay on better after.

4/5

I purchased a white marble skin for my gen 1 Amazon Echo. It came a day early and has great quality. It looks like real carved marble and the added gloss makes it look nice and clean. However, the bottom strip of the skin is a little too long, hindering me from giving 5 stars. I had to fold it slightly to fit the light and wires on the echo. Overall, they did a wonderful job on this skin and I would easily buy another for my other devices.

J. Davis, United States, 31 December 2021

iStyles responded:

Thank you for the review. We're glad to hear that you like how the White Marble Amazon Echo 1st Gen Skin set transforms the look of your Amazon Echo such that it looks like real carved marble.

We're sorry to hear that you had an issue with the bottom Skin piece. Every Skin piece should fit as they're precision cut and the layout was extensively tested but we're guessing that you might have accidentally stretched this piece when applying it. The Skins are made of high quality cast vinyl that is flexible enough to wrap around many surfaces and is less prone to shrinkage, but the material can stretch if pulled too hard. This piece is rather long and if it was stretched by just a little as it was wrapped around, it may result in the Skin being slightly too long as you've experienced.

The "fix", rather than a fold, is to cut the end of this piece slightly. Skins can be cut using a penknife or scissors. If you gently peel off the edge that's too long and cut it off, it'll look much cleaner.

Please feel free to contact us if you have any further queries or need assistance.

4/5

Fantastic stuff! Wasn't expecting this quality for this cheap.
Applying was way easier than I thought it would be. The sticker is rather forgiving, meaning you can really rub out any creases or peeling with no problem. Only issue I have is that the bottom left piece is not cut perfectly so I had the make due so the lines were even to match the right side of the mouse.
Edit: I was told these stickers be taken off and reapplied multiple times without any loss of stickiness and dang are they right!

J. Kettler, United States, 25 December 2021

Solid State White SteelSeries Rival 600 Gaming Mouse Skin

iStyles responded:

Thank you for the review. We're glad to hear that you like the SteelSeries Rival 600 Gaming Mouse Skin set!

We're sorry to hear though that you had an issue with the bottom left piece; this piece should fit as shown on the product images (click on the additional photos below the main product image) but applying this piece may be a little more tricky because of the complexity of the surface covered. If positioned properly, the piece will look like that shown on the product photos.

I'm assuming that you've managed to position this piece properly but if you want to realign it, just gently peel the piece off and it can be repositioned.

Please let us know if you have any further queries or need assistance.

4/5

Not a wrap but in pieces to be placed on drone. Good quality vinyl and easy separation with a small Exacto knife. Not bad for the price.

B. Carlson, United States, 27 October 2021

Coastal Rescue DJI Mini 2 Skin

4/5

Received last night 29 June 21. Delivered in a very timely manner after payment posted. The decals look excellent and of high quality. Looking forward to seeing how they look after they're on the drone.

G. Bond, United States, 30 June 2021

Carbon DJI FPV Combo Skin

4/5

Fair price, reasonably fast shipment, minimal directions. This was my first skin and figuring out how to separate the skin from the backing paper in the best sequence was challenging. A video specifically for the Surface Duo would have been nice.

R. Bilancia, United States, 25 May 2021

Solid State Grey Microsoft Surface Duo Skin