Designs

1/5

Terrible, expensive. Just skin in front laptop, not for all. Don’t buy it

H. Do, United States, 18 February 2018

Bianco Marble Laptop Skin

Black Marble Laptop Skin

iStyles responded:

We're sorry to hear that you did not like the Skin coverage. You custom sized a universal fit laptop Skin and this Skin set only comes with the lid Skin.

If you have a laptop that we support specifically, the Skin set may come with additional coverage for the wrist rest or even bottom of the laptop, but custom sized universal fit laptop Skins can only be custom sized for the laptop lid.

1/5

La peor experiencia compré hace muchos meses código 179860, y nunca llego, me siento estafado, perdí tiempo y dinero.

H. Flores Albornoz, Chile, 14 January 2018

Digital Urban Camo DJI Mavic Pro Skin

iStyles responded:

Lamentamos que su paquete aún no haya llegado. Su paquete fue enviado desde las instalaciones de los EE. UU. El 6 de noviembre con el ID de entrega USPS UA648282179US como id. Del paquete y el tiempo de entrega es generalmente de una a tres semanas dependiendo de cómo se enruta el correo y qué tan rápido lo maneja el servicio postal de destino. El paquete será entregado por el servicio postal en el destino.

Según https://tools.usps.com/go/TrackConfirmAction?tLabels=UA648282179US, el paquete se enruta correctamente dentro de los EE. UU. Y salió de los EE. UU. El 7 de noviembre. El paquete está siendo procesado por el servicio postal de Chile.

Su paquete será bastante grande, ya que contiene un DJI Mavic Pro Skin y es probable que su cartero local no pueda colocarlo en su buzón de correo. Debería haber dejado una nota para la recolección de este paquete en la oficina de correos cercana, pero esta nota a veces está fuera de lugar. Es probable que su paquete esté esperando la recolección en la oficina de correos y solo tiene que ir y recogerlo.

Podemos reenviar su paquete pero necesitamos que verifique lo siguiente respondiendo a nuestro correo electrónico:

1) ¿Revisó en la oficina de correos el paquete grande como se indicó en mi último correo electrónico?

2) ¿Es correcta la dirección de entrega utilizada (que escribimos en el correo electrónico)?

1/5

Would just like to give any potential customers a heads up that after you place an order this company makes you confirm your purchase by email. Unfortunately the emails go to junk mail so I never got my order, which I paid $20 to rush ship in time for Christmas. Will not be ordering from them again!

S. Williams, United States, 29 December 2017

iStyles responded:

We're sorry that you did not have a good experience. Most other orders are processed immediately (1 to 2 days production turnaround) but we manually verify orders that contain any of these products: Skins for LifeProof/OtterBox cases or Guitar Heros.

Lets face it, not everyone reads the product description. Enough customers were confused over these products and thought that they were purchasing LifeProof cases, OtterBox cases or the actual Guitar Hero controller such that we now manually check with customers who purchase these products before proceeding. It's more work for us but we rather check than simply ship them a product that they were not expecting and make them go through the return process.

We're sad that this did not work out for you - we sent you three emails over the course of 4 days and were waiting for your response. If you got back to us earlier, your order would have made it for Christmas. Your order was cancelled and refunded in full as per our correspondence.

Thank you for shopping at iStyles anyway.

1/5

Purchased skin's for wireless beats and when taking the skins off the paper to place on the beats headphones? they tore and stretched beyond using. Not happy with this product in the least.

T. Hausmann, United States, 18 March 2017

Baseball Beats Solo 3 Wireless Skin

iStyles responded:

We're sorry to hear that your Baseball Beats Solo 2 Wireless Skin was stretched during the Skin removal.

Our Skins are made of premium grade adhesive-backed cast vinyl, then sealed with a matte or gloss laminate for long-lasting protection. Cast vinyl is of notably higher quality and cost roughly 2.5 times as much as the usual calendared vinyl used elsewhere. Unlike calendared vinyl, cast vinyl does not discolour, is much less prone to shrinkage over time, much thinner, and can conform easily to just about any curve.

Cast vinyl is sturdy and will generally outlast the lifespan of the device but the material can stretch if pulled hard and this was probably what happened when you removed the Skin. We're not sure how you tore the Skin as that will require a fair amount of force - Skins have to be peeled off gently and then pasted on carefully. These are not exactly the rip off and slap on type. Care must be taken during the application process and the result will be well worth the effort.

We can make a replacement Baseball Beats Solo 2 Wireless Skin for you at no charge so that you can give it another go, and you just have to cover the shipping cost to get the new package to you. We've sent you an email regarding this replacement Skin.

1/5

COMPLETE SHIT. No way to get the front skin on the tablet without screwing it up. I am a patient person and have installed MANY screen protectors as I am in Tech business. This is just impossible to get on the device.

They should know better than to sell a skin like this that is impossible to get on the outline of a tablet without stretching and tearing.

DO NOT WASTE your money.

C. James, United States, 24 November 2014

iStyles responded:

We're sorry to hear that you stretched the Skin. The Skins are sturdy and will last for years if applied properly but they can stretch if pulled hard and they're especially vulnerable at the thinner stripes such as those around the screen frame.

One way to prevent stretching is simply not to press the Skin down until you are happy with the alignment (this way, it's easier to peel off), and when peeling off, take extra care and do so slowly.

We can send you a replacement and you just have to cover the shipping cost to get the new Skin to you. If you would like to proceed with the shipment of this free replacement Skin, reply to the email that we just sent to you and we'll get it set up.

1/5

When I received the case it was clear it wasn't made well. The pattern on the case did not cover the edges around the face of the phone and you could clearly see the white plastic. Figured I could live with that anyway. It took all of 3 days for the case to be broken near the corner with the volume buttons and it wouldn't stay on the phone so in the trash it went. The skins are great but I would never try one of these cases again. Waste of money.

G. Robbins, United States, 24 September 2014

iStyles responded:

Thank you for the feedback. We're sorry to hear that you did not like the case. I've passed your feedback on to the product team so that they can determine what happened.

In the meantime, we've processed a full refund for your case order. We're glad that you like the Skins from your previous order.

1/5

Bought a carbon fiber skin for my macbook pro 13 retina without cutout for the top logo. Ordered outer and inner skins. Expected there would be a bottom, but since it's not pictured I should have known better. Fit on the top is not good. I was able to center it on the top fine, but there is absolutely no way to get it on the top without leaving a very small border around all four edges. It's simply just a mm or two too small in all directions. Also even though the skin covers the logo, the skin is not fully opaque and the logo glows through it. It looks very bad. I ripped it off and trashed it. $42.00 in the trash. not pleased. I won't make the mistake of ordering from here again.

B. Lewis, United States, 29 September 2013

Carbon Apple MacBook Skin

iStyles responded:

Thank you for the feedback. We're sorry to hear that you had a bad experience with the Skin. We'll try to address your concerns as follows:

1) The "Outer" MacBook Skin does not cover the bottom because it is important to allow the device to "breath" during normal operation. This bottom area gets hot and the unibody acts as a heat sink - if it is covered, the heat will not be able to dissipate properly. The description states coverage for the top for the outer Skin and the area around the keyboard and trackpad for the inner Skin. We recommend using a Skin for styling and protection of the scratchable unibody during normal operation and when transporting the MacBook, put it in a padded sleeve or bag.

2) The Skin is opaque but the MacBook logo glow will be visible softly in very dim light conditions. Most customers like this effect and this is only visible in dim lighting. (the logo can be cut out for full visibility)

3) The top Skin will fit. If it's just an mm off on yours (out of the huge surface area on the lid Skin), it means that the Skin can be better stretched into place during the application process.

1/5

customer support wont respond for cancellation.

K. Creed, United States, 31 May 2013

iStyles responded:

Your cancellation was processed and we replied to your email within 4+ hours. We wish we can reply via email within minutes like we sometimes do but it usually takes a few hours (but isn't this really fast? Some companies take more than a day, or days!).

1/5

I purchased skins for a X Box 360, X Box Connect, Wii, Wii Controllers and Controllers for the X Box. All of these were "Satin Black" so as to cover the original "white plastic" that they were made from. I simply wanted to "hide" them in my audio cabinet. Now I have BLACK AND WHITE system items behind the glass. They did not cover the entire item, thus leaving white to show. A "skin" covers, it does not "patch" in spots. The cutouts for sensors are too large as well. Not worth it!

J. Norris, United States, 25 January 2013

Solid State Black Wii Nunchuk/Remote Skin

Solid State Black Xbox 360 S Skin

Solid State Black Wii Skin