Refine your choices
Designs
Fits: Various electronics
Reviews
/5Fits great looks awesomeW. Mischke, United States, 15 July 2018
/5Got my ps tv skin pretty quickly and it was easy to put on. So far no peeling or anything. No troubles.j. shivak, United States, 6 July 2018
/5I love everything about these skins. I ordered once before around a year ago & realized that I was over the design. So I came back to order more!I. Kotico, United States, 28 June 2018
Application? A breeze. I do have to say - TAKE YOUR TIME. Study the hell out of the pieces & your device. The skins are EXTREMELY sticky - beware. Take it easy & breathe! (Because I forget to ????)
Removal? EASY. I used a hairdryer on the lowest heat setting & the adhesive lifted ridiculously beautifully. My device looked as if I had just taken it out of the box. Untouched.
I absolutely love this company & this team. They are so responsive to emails, especially Tom & Michael! They take such good care of me, always. I will continue to recommend iStyles & I will forever be a returning customer ????????
/5Quick delivery trans ocean. Thanks a lotA. Stoeber, Germany, 11 June 2018
/5I wanted some skins for my Ryze Tello and my Mavic Air..N. Laloux, Belgium, 5 June 2018
I found them on Istyles.com :D
There"s a lot of skins for a lot of things and i found mine after some choices.
The expedition is really fast (From US to Belgium, 7 days) and the skin in themself are very nice done :)
Thank's for your product :D
/5Sticker is too slick to start with. Then its not a wrap like im used to with phones its literally just a darn sticker. Mine was a bit smaller than the one in the picture so it didnt even go to the curves at the edge of the back cover. Im sure they will tell me it was an application error. It was not! I have put skins on all my phones for the last 5 years. No refunds for used products so order at your own risk!c. hirner, United States, 2 June 2018iStyles responded:
We're sorry to hear that the Amazon Kindle Skin was not to your expectation. There are two types of vinyls that these Skins can be made from:
1) Conformed vinyl - this vinyl can be made into the "wrap" that you've described where the coverage can be extended to cover rounded surfaces at corners as it sticks so strongly. Such vinyl is used to make car decals where strong adhesion is necessary but when used to make a device "wrap", Skin application will be complicated as it requires a heat source to bend and stick, and the aggressive adhesive can damage the device surface when the Skin is peeled off, or at the least, leave a fair amount of adhesive residue on the device.
2) Non-conformed vinyl - this is the vinyl we use for our Skins as it has a balanced adhesive that allows for easy application (can be repositioning multiple times during application), will stick well (outlasting the lifespan of the device), and more importantly, will not damage the device surface when the Skin is removed. You do not need a heat gun for the Skin application either but the disadvantage is that this material only bends around a single axle in 3D and the Skin cannot be extended to cover rounded surfaces, such as those at the corners on the back of the Amazon Kindle.
/5Good quality and very good price fast deliver would give you 10 starsI. Salas Bernal, Germany, 30 May 2018
/5I am a repeat customerJ. Nunemacher, United States, 20 May 2018
High quality skins. Very fast shipping.
/5The skin does not fit perfectly. There are gaps in the coverage.R. Mon, United States, 14 May 2018iStyles responded:
Thank you for the feedback.
Most phone Skin sets for the back of phones are a single piece that only covers the flat surface on the back of the phone and does not extend to the side. The Essential phone Skin set however has extended coverage that wraps to the sides and all around the corners because it was possible to do so given the flat nature of the sides. However, though the sides are covered, there has to be a little "give" at the corners to allow for easier application and to ensure that the Skin stays down.
You'll probably be able to cover the corners more completely with a conformed vinyl as this material can be wrapped around 3D corners when a heat source is applied and it sticks strongly. Conformed vinyl is a good material for specific applications where you require strong adhesion, such as when wrapping cars, but the danger of such aggressive adhesive when used on electronic Skins is that you can potentially damage the surface when the vinyl is peeled off because it sticks so strongly.
Our non-conformed vinyl has a more balanced adhesive that allows for easy application (where you can reposition multiple times during the application process), will stick well (usually outlasting the lifespan of the device) and more importantly, will not damage the device surface when the Skin is removed. You do not need a heat gun or hair dryer for the Skin application either but the disadvantage is that this material only bends around a single axle in 3D and there is only that much that can be done to cover corners.
The Essential Skin set corners should look like what you see on the product page of the product you purchased. The slight gaps in the corners are shown on the main product photo. Additional photos on the page at Photo 1 and Photo 2 shows how the corners look like after proper Skin application. It's not an absolutely perfect coverage at the corners but this is as complete as it gets without using an adhesive that can potentially damage the device.
/5It fit perfectly. A good purchase for sureE. Kuykendall, United States, 12 May 2018
Customize
